Introduction to the production formula of aluminum

2022-07-22
  • Detail

In terms of home decoration, aluminum alloy materials are mainly used for the production of doors and windows, and this production process is very strict. Because aluminum alloy doors and windows are not waterproof profiles, they connect each point through waterproof film, and the outside of the glass must also be sealed with glass glue. Today, this article will introduce the formula of making aluminum alloy doors and windows, and what is the difference between 70 and 80 formula

in terms of home decoration, aluminum alloy materials are mainly used for the production of doors and windows, and this production process is very strict. Because aluminum alloy doors and windows are not waterproof profiles, they are connected to each point through waterproof film, and the outside of the glass must also be sealed with glass glue. Today, this article will introduce the formula of making aluminum alloy doors and windows, and what is the difference between 70 and 80 formula

aluminum alloy door and window production formula: 70 profile

1 Window without sill

frame = height of window; Up and down = window width -2 cm; Tick = border -5.2 cm; Up and down = up and down ÷ 2+0.5 cm (see the exceptional size for three fans); Glass height = tick light -9.3 cm; Glass width = up and down -6 cm (the middle of the three fans is -7 cm); Yarn fan height = frame -5 cm; Width of yarn fan = upper and lower +1 cm

2. Window with top beam

frame = height of window; Up Medium Lower = window width -2 cm; Tick light = number of lines -1.2 cm; Upper and lower = upper, middle and lower ÷ 2+0.55: plug board Neutral = border - number of lines -7 cm; Transverse length of thread = inner diameter -0.6cm; Vertical length of buckle = neutral Inserting plate -1 cm (thread cutting and corner cutting); Glass height = number of lines -10.5 cm (also = tick on -9.3 cm); The width of glass is the same as above; Yarn fan height = number of lines -0.5cm; The width of the yarn fan is the same as above

3. Exceptional size of three fans

upper and lower parts of small fans of three fans = (sliding +9) ÷ 4-1.8 cm; Upper and lower parts of the big fan of three fans = (sliding +9) ÷ 2; The glass height of the small fan is the same as above; The glass height of the large fan is the same as above, and the width = upper and lower -7 cm

aluminum alloy door and window production formula: 80 profile

1 Window without sill

frame height = window height; Up and down = window width -3 cm (Luhe's -3.5 cm); Tick = border -5.3 cm; Up and down = up and down ÷ 2-4.7 cm (the large fan width of three fans = up and down ÷ 2-2 cm, and the small fan width = up and down ÷ 4-4.7 cm); Glass height = tick light -7.6cm; Glass width = upper and lower -0.5cm; Yarn fan height = frame -7.5cm; Yarn fan width = up and down ÷ 2。

2. Window with top beam

frame = window height; Upper, middle and lower = window width -3 cm (Luhe's -3.5); Tick = frame - full width of upper beam -1.8 cm; Upper and lower = upper, middle and lower ÷ 2-4.7 cm (the same for three fans); Insert plate, neutral = full width of upper beam -7.2 cm; Horizontal length of thread = upper, middle and lower -3.8 cm; Vertical length of thread = number of neutral inserting plates -0.2 cm; Yarn fan height hanging inside = frame - upper beam full outside -4 cm yarn fan height hanging outside = frame - upper beam full outside -1.3 cm; The width of the yarn fan is the same as above

3. The exceptional size of three fans

this calculation formula is consistent with that of type 70

article summary: the above content mainly introduces the manufacturing formula of aluminum alloy doors and windows, which is divided into two different profiles, 70 and 80, to provide you with learning and reference. After reading this article, I hope the content of this article can help you and provide convenience for you in the future

泉州男科医院

广州男科医院

肇庆不孕不育医院

温州皮肤病医院

Copyright © 2011 JIN SHI